Home
Basket Menu

Payment Options

S-series - Yale style slamlock - Crew Cab

Manufacturer: Ford
Van Model: Transit (2000 inc '06 - 2014)
Wheel Base: Standard
Roof Height: Standard
£65.14
excl VAT

Please Choose:



Add to Cart:
View Basket
Return to Shop
Description

A slamlock is a device that automatically locks the vehicle door immediately when it is shut, without requiring any operation by the driver.

It is primarily designed for applications such as multi drop delivery, high value loads and applications where the owner/ operator requires control over the security of their goods. It is the function that appeals as much as the security.

Our slamlocks integrate with the vehicle manufacturer's locking systems. This provides maximum security along with straightforward installation. They combine a genuine Security Slam operation with a high visual deterrent and a pleasing appearance.

All our slamlock kits are designed with escape from locked load areas, via the manufacturer's own internal exit mechanism in mind. This is an extremely important feature as it ensures compliance with Health & Safety at work and Corporate Manslaughter legislation.

Our kits are vehicle door specific and contain all the required fixtures, fittings and instructions to enable a technician to perform a cost effective professional installation.

They are available in both our S-series and Thatcham accredited T-Series models.

Installation

Level of fitting competence required: 8 out of 10 (should be left to the professionals!)

Installation normally takes around one hour per door. Stages involved include removing the inside door trim, marking the centre point of the cylinder position using the measurements supplied, drilling a pilot hole and then opening up with a cone cutter or cylinder aperture cutting tool. Once the hole is cut to size insert the cylinder assembly into the door in the following order (from the outside) cylinder,bezel and gasket. Fit  the internal shield inside the door aperture, then fit and tighten the 30mm cylinder nut. Disengage the manufacturer's lock mechanism cable and connect it to the slamlock cylinder.

THIS BASE PRICE IS FOR SUPPLY ONLY OF ONE SINGLE LOCK KIT FOR THE NEARSIDE PASSENGER DOOR  OF A TRANSIT CREW CAB.2 LOCK KIT WILL BE FOR BOTH SIDE DOORS OF THE PASSENGER AREA

LOCKS ARE ALSO AVAILABLE FOR CAB DOORS.

If you require other doors to be fitted, please choose from the drop down box above.

If requiring installation of your locks please select the correct number of locks requiring fitted.

Fitting Option Information...

Supply Only Supply Only
Workshop Fit Workshop Fitting
Mobile Fit Mobile Fitting

When you order a product as "Supply Only", we'll deliver the product direct to your chosen address. You will be responsible for the fitting of the product (unless you ask for our assistance).

- Visit our Supply Only page for more information
- Close this info box

When you order a product for "Workshop Fitting", it will be reserved from stock held at our installation centre. After you've completed the checkout process we will contact you to confirm a mutually convenient time for fitment to take place at our workshops in Glasgow.

- Visit our Supply & Vanax Fitting page for more information
- Close this info box
When you order a product for "Mobile Fitting", it will be reserved from stock held at our installation centre. After you've completed the checkout process we will contact you to arrange a mutually convenient time for fitting at your chosen location. Our mobile fitting team will bring all products you have purchased for installation on the day selected. Please remember your van must be parked on private land during installation.

- Visit our Supply & Mobile Fit page for more information
- Close this info box