Search
Browse by Product
Browse by Van Make
Payment Options
Description
DRIVER’S MATE
This is the first in a series of exciting new products to make the drivers and operators life easier and save time and money. This unit will allow the engine to keep running while the key is removed from the ignition, thereby ensuring there is sufficient power to use Beacons, Accessories, Tail Lifts etc. without danger of battery discharge. On re-entering the cab the key must be re-inserted. If not and the handbrake, footbrake or clutch is operated the engine will cut out immediately (3 circuit dependent on vehicle make and model)
AVDM001 Technical Specification
12 Volt
3 circuit monitoring (vehicle model dependent)
Momentary dash mounted switch to activate the unit
Solid state encapsulated electronics to protect against dust and moisture
Microprocessor controlled
Self adjusted to individual vehicle
AVDM001 Operating Overview
When fitted simply connect all circuits. Start engine and with handbrake on and the clutch and footbrake in the normal off position. Press the red button on the unit, the microprocessor in the unit reads and records the vehicle settings and registers them as the norm. When activated, if these settings change the unit cuts the engine off.
Part Number: AVDM001
Fitting Option Information...
Supply Only
Workshop Fitting
Mobile Fitting
When you order a product as "Supply Only", we'll deliver the product direct to your chosen address. You will be responsible for the fitting of the product (unless you ask for our assistance).
- Visit our Supply Only page for more information
- Close this info box
When you order a product for "Workshop Fitting", it will be reserved from stock held at our installation centre. After you've completed the checkout process we will contact you to confirm a mutually convenient time for fitment to take place at our workshops in Glasgow.
- Visit our Supply & Vanax Fitting page for more information
- Close this info box
- Visit our Supply & Vanax Fitting page for more information
- Close this info box
When you order a product for "Mobile Fitting", it will be reserved from stock held at our installation centre. After you've completed the checkout process we will contact you to arrange a mutually convenient time for fitting at your chosen location. Our mobile fitting team will bring all products you have purchased for installation on the day selected. Please remember your van must be parked on private land during installation.
- Visit our Supply & Mobile Fit page for more information
- Close this info box
- Visit our Supply & Mobile Fit page for more information
- Close this info box